The EL9100 functions at temperature ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). Whether on the factory floor or the street corner, the EL9100 will provide flawless communications when you need it most. The EL9100 series supports multimode/single-mode fiber optics. The RJ-45 port on this unit provides Auto-MDIX and auto-negotiation. The link-fault-pass-through feature allows the network management agent on adjacent equipment to react to a broken link. Flexibility is the main feature of the EL9100, it may be DIN rail or panel mounted, and comes with power options to match the applications that require a tough, environmentally hardened, Gigabit Ethernet media converter.

- Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/force mode, link down alarm
- 10/100/1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- Alarms for power and port link failure by relay output
- Redundant power inputs with Terminal Block and DC Jack
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Hardened aluminum case
- Supports DIN-Rail, Panel or Rack Mounting installation

Please see Datasheet

EL9100-X1Z
10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter

Gigabit Options:
(X) = 3 : 1000BASE-SX (SC) –550m
4 : 1000BASE-SX (SC) –2Km
5 : 1000BASE-SX (ST) –550m
A : 1000BASE-LX (SC) –10Km
B : 1000BASE-LX (SC) –20Km
H : 1000BASE-LX (ST) –10Km
I : 1000BASE-LX (ST) –20Km
R : 1000BASE-BX (SC) WDM –TX:1310nm/RX:1550nm –20Km
S : 1000BASE-BX (SC) WDM –TX:1550nm/RX:1310nm –20Km

Power Input Interface:
Z = B : Terminal Block & DC Jack

Power Supply: (Optional)
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers, as required:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B - The external power adapter and power cord are not included. Please order the following part numbers, as required:
41-136044-X X=1,2,3,4,5

Installation Type: DIN Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480