Certified by IEC61850-3 & IEEE1613 for power substation applications,the EX87000 series switch comes with twenty four 10 /100BASE-TX and/or 100BASE-FX/BX ports plus four 10/100/1000BASE-TX and/or Gigabit SFP combo (1000BASE-SX/LX/BX) ports in a package. The EX87000 functions at temperatures ranging from -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). Fully manageable via SNMP, Web Browser, Telnet or Console port, the EX87000 is designed to integrate 10/100Mbps networks into fiber optic Gigabit backbones. Four Gigabit SFP combo ports can be fiber optic or copper ports. The EX87000 series supports Snooping, Rapid Spanning Tree for Redundancy, QoS for priority queuing,and port mirroring. Users may choose among SNMP RMON, Web browser, or Telnet for remote monitoring and configuration. It also supports rate control,which allows users to set the maximum bandwidth on each port individually.
- Complies with IEC61850-3 & IEEE1613 Environmental requirements for power substation automation systems
- Complies with EN50121-4 environmental requirement for Railway application
- Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
- EtherWAN proprietary "a-ring" support for network redundancy; recovery time <15ms
- IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP compatible
- IP Multicast Filtering through IGMP Snooping V1, V2 & V3
- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS with four priority queues
- MAC-based trunking with automatic link fail-over
- RS-232 console, Telnet, SSL/SSH, SNMP V1, V2c & V3, RMON
- Web Browser, and TFTP Management
- Supports Command Line Interface in RS-232 Console
- Supports IEEE802.1x Security
- Bandwidth Rate Control
- Per-port programmable MAC address locking
- Up to 24 Static Secure MAC addresses per port
- Port mirroring
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- -40°C to 75°C (-40°F to 167°F) operating temperature range
- Supports NTP
Please see Datasheet
EX87604-0XYZ
24-port 10/100BASE-TX + 4-port Gigabit Managed Ethernet switch
EX87424-WXYZ
16-port 10/100BASE-TX + 8-port 100BASE-FX + 4-port Gigabit Managed Ethernet switch
EX87244-WXYZ
8-port 10/100BASE-TX + 16-port 100BASE-FX + 4-port Gigabit Managed Ethernet switch
EX87064-WXYZ
24-port 100BASE-FX + 4-port Gigabit Managed Ethernet switch
100FX Fiber Options :
(W) =1 : Multi Mode (SC)
2 : Multi Mode (ST)
6 : Multi Mode (SC) WDM-TX:1310nm/RX:1550nm-2Km
7 : Multi Mode (SC) WDM-TX:1550nm/RX:1310nm-2Km
8 : Multi Mode (SC) WDM-TX:1310nm/RX:1550nm-5Km
9 : Multi Mode (SC) WDM-TX:1550nm/RX:1310nm-5Km
A : Single Mode (SC) -20Km
B : Single Mode (SC) -40Km
H : Single Mode (ST) -20Km
P : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
Q : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
R : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
S : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km
V : SFP Mode
*More 100FX Fiber options also available upon request.
Numbers of Gigabit Fiber:
(X) =0 : None
1 : One Gigabit Fiber port
2 : Two Gigabit Fiber ports
3 : Three Gigabit Fiber ports
4 : Four Gigabit Fiber ports
Gigabit Options:
(Y) =3 : 1000BASE-SX (SC)
A : 1000BASE-LX (SC) -10Km
B : 1000BASE-LX (SC) -20Km
R : 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm -20Km
S : 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm -20Km
V : 1000BASE SFP Combo(1000Mbps SFP Combo with 10/100/1000BASE-TX)
*More Gigabit options also available upon request.
Power Input Interface:
(Z) =C : 100 ~ 240VAC, R : 100 ~ 240VAC Redundant power supply
